1·Main products: oil tank, oil tube, oiler support, oil pump, oil applying wheel etc.
产品主要结构：油箱、油管、安装支架、油泵总成及涂油轮等组成。
2·Will the oil poured into the tube units, amount of oil tube two-thirds of the volume.
将待检油品倒进试管中，油量为试管容积的三分之二。
3·Larger diameter of oil tube, fast drop on the temperature and slow drop on the pressure.
油管直径越大，温度下降越快，压力下降越慢。
4·A kind of heating technology of directly heating crude oil in the oil tube by the oil tube and bushing is developed.
提出了一种利用油管和套管作为发热体直接加热油管内原油的方法。
5·This article presents an operating process of running and pulling oil tube with dumbbell coupling by single elevator.
论述了使用一种带有“哑铃型”接箍的油管进行单吊卡起下油管的作业工艺。
6·To add a new unit under the pump, it makes the oil tube telescopes elastically as the oil well pump moves up and down.
在泵下增设一个新装置，使抽油泵上下运动时，油管产生弹性伸缩。
7·Each electrical heater band can be arranged in a sealing bush 1 which is combined with the oil tube in case of the contact with oil.
每段电热带可置在与油管结合的密封套筒1里，以防与油液接触。
8·The oil hole zoning and pedal locks, set on the tank tops, used for measuring the elevation and oil tube temperature and sampling, etc.
量油孔分带锁式和脚踏式，安装于油罐顶部，用于测量管内油品的标高和温度及取样等。
9·Oil surface gap value, when winter static shall prevail when running can be appropriately heightening face, to keep the oil tube produce oil tent.
油面间隙值以静态为准，当冬季运行时可适当加高油面，以保持内筒产生油幕。
10·The front and rear axle assemble, high-pressure oil tube and other key components are produced by our company with advanced equipment and technology.
前后桥总成、高压油管等关键部件由公司采用先进设备和技术生产制造。